Termékek doboz doboz dobozok (373)

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

1455TNUT (Hammond Manufacturing Enclosures) 1455NC Series Enclosures T-Nut - Product Features: • Designed to house P.C. boards or equipment - for easy enclosure mounting to aluminium channel. • Two versions to choose from (open bezel with metal endplates OR solid ABS plastic bezel). • Sizes for P.C. boards with 92mm (min.) to 98mm (max.) width. Enclosures will not accept and were not designed for 100mm wide Eurocard. • P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body. • Rugged one piece body - constructed from extruded aluminium with a minimum thickness of .09" (2.29mm). • Extruded body and aluminium endplates (on metal endplate version) are clear anodised. • Open bezel - metal endplate version includes eight (8) clear zinc plated assembly screws. Note: Recommended screw torque is 5 lbf/in. Solid bezel version includes eight (8) black assembly screws. Note: Recommended screw torque is 5 lbf/in.

Steel Edged Polymer Concrete Silt-Box c/w Ductile Iron Narrow Slot Grating

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Also suited for vertical or horizontal mounting of printed circuit boards (using optional P.C. card guides). • Moulded from flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Interior of each enclosure part is specially masked and sprayed with an RFI/EMI copper conductive coating. • Coating manufacturer specifies an attenuation of more than 75 db from 1 Mhz. to 1 Ghz. • Designed to meet IP54. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Stocked in black with matte textured finish.

Product Features: • Standard lengths of 80mm, 120mm, 160mm and 220mm. Custom extrusion lengths are available upon request. • Standard widths of 104mm, 132mm, 164mm and 224mm. Custom extrusion widths are available upon request. • Fixed extrusion height of 120mm (3U). • Standard anodised colours include Pre-Anodised Silver. Custom anodised colours are available upon request. • Manufactured in Aluminium 6063 T6. • PCB Size: • Maximum component width of 220mm • Maximum component height of 95mm • Please remember custom size length and widths are available, as well as P.C. Board Carrier Plates • Large range of accessories are available include DIN Rail Clips, Clip on Mounting Brackets, etc.

Product Features: • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Heavy duty, thick wall design with an average wall thickness of .13" (3.3mm). • Standard versions from flame retardant ABS plastic (carries a UL flammability rating of 9V-0). • On standard and water-tight versions, countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly required. • Economy version is moulded in general purpose ABS plastic. • Economy version utilizes self tapping screws into plastic posts (no brass inserts). • Standard and economy versions are rated IP54, but can be upgraded to IP66 with gaskets and screws with O-rings. • Water-tight versions are rated IP66. • Stocked in black and grey with matte textured finish.

Product Features: • Rugged, diecast aluminium alloy (tough yet easy to machine), electronic instrument enclosure. • Two piece "tongue and groove" construction with a replaceable one-piece silicone rubber gasket provides protection against access of dust and water. Gasket supplied loose inside the enclosure (not pre-installed). • Gasket has a temperature rating of -40C to +150C. • Ideal for repetitive opening and closing. • Four recessed stainless steel machine screws secure lid into tapped holes. • Easy to wall mount using "through box - blind hole" construction, outside of gasket protection. • Lid screws are self captivating (lid holes are threaded with the first installation of lid screws). Note: Except for 1590Z060, 1590Z061, 1590Z062 and 1590Z063. • Designed to meet IP68. • North American Mark of Safety - cUL and UL listed. Certified to Type 4, 4X, 6, P.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Convection ventilation is provided by slots in the bottom and removable rear panels. • Aluminium case is finished in satin blue with a contemporary grey panel. • Vented back panel, bottom, and sides are made from 0.081" thick aluminium • Sloped front panel is made from 0.064" aluminium • Supplied with hardware and rubber feet.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Ideally suited for vertical mounting of printed circuit boards (internal side walls include moulded in card guides). • Integral card guides accept 1.5mm (0.062") P.C. cards. • Lap joint construction provides protection against access of dust and splashing water. • Designed to meet IP54. • Standard versions are moulded from easy to machine flame retardant ABS plastic, which carries a UL flammability rating of 94V-0. • Economy versions are moulded from general purpose (not flame-retardant plastic). • On standard versions the lid is secured with M3 x 10mm Philips machine screws, threaded into integral brass bushings. Perfect for applications when repetitive assembly and disassembly are required. • Economy versions are assembled with self tapping screws into fully plastic posts. • Black enclosures include black screws, while all others include standard nickel finish screws.

Product Features: • Ergonomically designed for hand-held comfort. • Choice of five sizes and six colour combinations. • All sizes except 1553A available with or without battery compartment. • Moulded in general purpose ABS plastic with a soft, plastic overmould for comfortable grip. • Top cover is recessed for membrane display or keypad. • P.C. board standoffs are moulded into case. • Includes removable front panel (for easy modifications) and assembly hardware (except for smallest 1553A units). • Battery door and compartment version includes 4 battery clips (for 2 - AA batteries) and a 9 volt (PP3) battery clip. • Grey 1553 series enclosures include nickel plated screws. All other colours use black screws. Refer to product datasheet's for correct part numbers. • Designed to meet IP54.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Made of strong, economical 20 gauge steel. • Rugged powder coat finish: beige panels with textured black covers. • Choice of sloping or vertical front panels by reversing case. • 6-32 Philips nickel plated screws and self-adhesive rubber feet included.

Product Features: • Spot welded - heavy duty construction chassis. • Natural aluminium finish - also available in painted steel with walnut side panels. • Side panels are made from solid walnut and routed out to fit over ends of chassis (pre-punched for easy mounting). • Usable surface of chassis front, back and top are reduced by roughly 7/8" (22mm) due to inset in walnut sides. • Optional bottom plates are punched with 4 holes - 3/16" diameter. • Note: The steel chassis covers (1451 Series) are NOT compatible with this series.

Product Features: • 18 gauge steel base and top - for extra strength (front and back panel will not push in from mounted buttons, controls, connectors, etc). • Sides include two horizontal rows of ventilation. • Choice of sloping or vertical sides by reversing case. • Sold pre-assembled with a two tone grey powder coat finish. Top is dark satin grey. Bottom, front and back is smooth light grey. • Comes with four self adhesive rubber feet and required hardware.

Product Features: • Rugged, diecast aluminium alloy (tough - yet easy to machine), electronic instrument enclosure. • Factory powder coated to save stomp box manufacturers and experimenters time and money. • Coated with a smooth gloss polyester powder coat for a lasting finish, even after machining. • Smooth finish allows for easy adhesion of labels and/or silk screens. • Colours are matched to standard RAL colours. • Lap joint construction provides protection against access of dust and splashing water. Also provides for improved EMI/RFI shielding. • Designed to meet IP54. IP65 rating available, but this also requires water-tight screws. • Low side wall draft angle (2 degrees or less) for easy P.C. board mounting.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Moulded from a grey, glass reinforced polyester. Smooth finish. • Includes gasketed lid with two piece "tongue and groove" construction. • Heavy duty, thick wall design. • North America Mark of Safety - C UL and UL listed. Industrial Control Panel Enclosure Certified to NEMA 4, 4X standards (UL 508A) - File #E65324 and IP66 rated. • Impact rating of IK08 per IEC62262. • Lid contains self captivated stainless steel screws. • Gasket material is Mohogumi rubber (EDPM). Heat resistance 100-120°C, cold -40°C. • Easy wall mounting via "through box - blind hole" construction, outside of the gasket protection. • Internal mounting shelf and bonding / mounting nuts moulded in. • Optional 16 gauge, galvanized steel inner panels available.

Product Features: • The Clipper Series is a British-designed hand held enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards for use in hand held applications. • Ergonomically styled for a secure and comfortable grip. • Moulded in a choice of black (RAL 9005) or grey (RAL 9018) - flame retardant ABS plastic. • Satin texture finish. • Complete with top and bottom, removable front panel, battery door (except on the smallest size) and three self tapping screws. • The top panel has a flat display area, perfect for labels, silk screening, membrane keypads or easily machined. • The base is moulded with bosses for easy P.C. board mounting. • The removable end panel is securely clamped by the two box halves and easily customised or replaced by an infrared panel. • Battery compartment (except on the smallest size) suitable for a 9V (PP3) battery. Battery clip not included.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

Product Features: • Simple snap-fit assembly and wall-mounting features designed for IoT or general purpose applications. • Choice of vented or unvented. • Vented versions protection electronics from harmful contact with hands or tools, but allows entry of air and moisture for applications which require environmental exposure (e.g. sensors). • Ideally suited for mounting of printed circuit boards. • Slots on the base of the enclosure allow for easy wall-mounting. • Knockout on the base can be removed with a screwdriver and used for wire entry. • Moulded in ABS plastic (material has a UL94-HB rating). • Choice of (4) square/rectangle sizes and (3) circles sizes. Stocked in black, grey, and white. • Satin texture finish. • Enclosure features a snap-fit assembly and can be reopened repeatedly as needed. No hardware required. • (4) P.C. board standoffs moulded into interior. • Designed to meet IP30.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.

For more information on this product range please click the link above or simply visit https://kgaenclosures.com to view the complete range of enclosures, transformers and components we stock, all at great competitive prices.